PROLYTE
TRUSSES

S66 Series truss is constructed of main tubes (50 x 4 mm) and diagonals (30 x 3mm). Equipped with the CCS7 conical coupling system, the S66 truss is fast and easy to assemble. Designed as a pre-rig truss for par cans the S66 truss offers a strong truss with a very high loading capacity. The clever pin orientation guarantees fast and fool proof assembly. S66 truss is available in rectangular and square profiles and a range of corners and accessories. 

The Prolyte CT Tower with main Tubes 60x5mm and diagonals of 30x3/48x3mm is also usable as a pre rigg truss. With 16m span it has a center point load of 1315 kg. 



Light weight system Main tubes 48x3mm Braces 16x2mm 

Description of Prolyte: H20LB Series truss is constructed with both main tubes and diago­nals (48,3 x 3 mm). Equipped with the CCS6 conical coupling system, the H20LB truss is fast and easy to assemble. The H20LB truss is a frame girder, without diagonal bracing and with rigid joints between top and bottom chords and verticals. The H20LB is designed to create matrix frames for circumstances with low headroom, like studio installations. Standard box corner ribs make it a complete and flexible system. 

Description of Prolyte: H40 Series truss is constructed of main tubes (48,3 x 3 mm) and diago­nals (20 x 2 mm). Equipped with the CCS6 conical coupling system, the H40 truss is fast and easy to assemble. The H40 offers extra strength, next to its flexible application possibilities and is the ideal solution for the event or exhibition market. H40 truss is available in ladder, triangular and square profiles and a range of corners and accessories. 

Description of Prolyte: S36 Series truss is constructed of main tubes (50 x 4 mm) and diagonals (25 x 3 mm). Equipped with the CCS7 conical coupling system, the S36 truss is fast and easy to assemble. The S36 truss offers a compact truss with a high loading capacity; the S36V has a 4-sided webbing, making it strong in a vertical and horizontal plane. This compact and flexible truss is a standard for rental companies all over the globe. The clever pin orientation guarantees fast and fool proof assembly. S36 truss is available in rectangular and square profiles and a range of corners and accessories. 

Description of Prolyte: The ST tower is based on S40T mast sections. These mast sections have one-sided horizontal bracing to facilitate safe and easy climbing of the towers, with the use of an appropriate fall protection system. The ST tower uses several sleeve blocks that combine all the trusses from the S and B Series. This makes it possible to fit any of the S Series trusses to all four sides by means of bolted female CCS7 couplers. The ST tower has a self-weight of 120 kg. The ST sleeve block is a fully bolted structural element, making it much stronger and more precise than conventional welded versions. The ST tower is a cost-effective investment. You need only purchase the special parts if you wish to expand your truss system with towers. 

Description of Prolyte: S52 Series truss is constructed of main tubes (50 x 4 mm) and diagonals (25 x 3 mm – 30 x 3mm). Equipped with the CCS7 conical coupling system, the S52 truss is fast and easy to assemble. The S52 truss offers a strong truss with a very high loading capacity; the S52SV has a 4-sided webbing, making it strong in a vertical and horizontal plane. This study truss is a standard for rental companies all over the globe. The clever pin orientation guarantees fast and fool proof assembly. S52 truss is available in rectangular and square profiles and a range of corners and accessories. 

B100RV Series truss is constructed of main tubes (60 x 6 mm) and diago­nals (48 x 3 mm). Equipped with the CCS7 conical coupling system, the B100RV truss is fast and easy to assemble. Due to its 4-sided webbing the B100RV truss can absorb vertical as well as horizontal loads, which make sit ideal for outdoor or 3 dimensional structures. Standard equipped with a set of castors, the truss is easy to transport and stack, and clever pin orientation makes the assembly fool proof. B100RV truss is available in triangular and square profiles and a range of corners and accessories. Malecon is one of the biggest B100 truss rental partner in europe. The B100 truss is available in silver and black. 

Description of Prolyte: The D75T truss is constructed of main tubes (80 x 10 mm) and diago­nals (40 x 3 mm). The D75 truss is equipped with a smart, orientation free, pin-fork type connection and is fast and easy to assemble. The D75 truss is developed for special applications where extreme loads or circumstances require extreme strength; it can be used as mast section in combination with tower systems or as span in combination with the mammoth truss. Due to its 4-sided webbing the D75 truss can absorb vertical as well as horizontal loads, which make sit ideal for outdoor or 3 dimensional structures. The integrated horizontal bracing facilitates safe and easy access of the mast sections when in position. 

Describtion of Prolyte: he M145RV Mammoth truss is constructed of main tubes (100 x 8 mm) and diago­nals (60 x 60 x 3,5 mm and 50 x 4 mm). The M145RV truss is equipped with a smart, orientation free, pin-fork type connection and is fast and easy to assemble. The M145RV truss is developed for special applications where extreme loads or circumstances require massive strength; it can be used as mast section in combination with tower systems or as span in combination with the D75 truss. Due to its 4-sided webbing the D75 truss can absorb vertical as well as horizontal loads, which make sit ideal for outdoor or 3 dimensional structures. Spans up to 30 metres are no challenge for this truss. Other truss types can be stored inside the M145RV truss.